1
E 7.112.7/11.16
Inline lters NF
up to 3500 l/min, up to 25 bar
1. TECHNICAL
SPECIFICATIONS
1.1 FILTER HOUSING
Construction
The lter housings are designed
in accordance with international
regulations. They consist of a lter
housing and a threaded cover plate.
Standard equipment:
bypass valve
port for clogging indicator
1.2 FILTER ELEMENTS
HYDAC lter elements are validated
and their quality is constantly
monitored according to the following
standards:
ISO 2941
ISO 2942
ISO 2943
ISO 3724
ISO 3968
ISO 11170
ISO 16889
Number of lter elements
NF Elements
160 1x0160 R
240 1x0240 R
280 1x0280 R
330 1x0330 R
500 1x0500 R
750 1x0750 R
950 1x0950 R
13xx 1x1300 R
26xx 1x2600 R
5240 2x2600 R
7840 3x2600 R
10440 4x2600 R
Filter elements are available with the
following pressure stability values:
Optimicron
®
(ON): 20 bar
Optimicron
®
Pulp & Paper
(ON/PP): 10 bar
Stainl. st. wire mesh (W/HC): 20 bar
Stainless steel bre (V): 30 bar
Ecomicron
®
(ECON2) 10 bar
Paper (P/HC) 10 bar
Betamicron
®
/Aquamicron
®
(BN4AM): 10 bar
Aquamicron
®
(AM) 10 bar
1.4 SEALS
NBR (=Perbunan)
1.5 MOUNTING
Inline lter
1.6 SPECIAL MODELS AND
ACCESSORIES
Mounting bracket for NF 1310, 1340,
2610, 2640
Mounting ange for NF 1340/2640
Filling connection for NF 330,
500, 750, 950, 1350, 2650 on the
contaminated side
Foot bracket option for
NF 160-750, 950, 1350, 2650
Quick release coupling on the lling
connection for NF 160, 240, 280
Check valve on the clean side for
NF 160, 240, 280
For applications up to 40 bar, please
make separate request! (only for NF
950, 1350, 2650)
NF lter as tank-top return line lter
(type code 1.x) and as inline lter
(horizontal inlet ange at top, outlet
vertical;(type code 3.x) on request
1.7 SPARE PARTS
See Original Spare Parts List
1.8 CERTIFICATES AND APPROVALS
On request
1.9 COMPATIBILITY WITH
HYDRAULIC FLUIDS ISO 2943
Hydraulic oils H to HLPD DIN 51524
Lubrication oils DIN 51517, API,
ACEA, DIN 51515, ISO 6743
Compressor oils DIN 51506
Biodegradable operating uids
VDMA 24568 HETG, HEES, HEPG
Fire-resistant uids HFA, HFB, HFC
and HFD
Operating uids with high water
content (>50% water content) on
request
1.10 IMPORTANT INFORMATION
Filter housings must be earthed.
When using visual clogging indicators,
the BM version (visual with manual
reset) only should be used.
When using electrical clogging
indicators, the electrical power supply
to the system must be switched off
before removing the clogging indicator
connector.
1.3 FILTER SPECIFICATIONS
Nominal pressure 25 bar
Max. operating pressure 30 bar at max. 10
6
cycles
Temperature range -10 °C to +100 °C
Material of lter head Aluminium
Material of tube (housing) Steel up to NF 750
Aluminium for NF 950 and above
Material of cover plate Aluminium
Type of clogging indicator VM (differential pressure measurement)
Pressure setting of clogging indicator 2 bar (others on request)
Bypass cracking pressure 3 bar (others on request)
Symbol for hydraulic systems
NF
160
NF
240
NF
280
NF
330
NF
500
NF
750
NF
950
NF
1350
NF
2650
NF
1340
NF
2640
NF
5240
NF
7840
NF
10440
on request
NF
1310 2.x
on request
NF
2610 2.x
VA = clogging indicator
E 7.112.7/11.16
2
2. MODEL CODE (also order example)
2.1 COMPLETE FILTER
Filter type
NF
Filter material
ON Optimicron
®
P/HC Paper BN/AM Betamicron
®
/Aquamicron
®
ON/PP* Optimicron
®
Puls & Paper W/HC Stainl. st. wire mesh AM Aquamicron
®
V Stainless steel bre ECO/N Ecomircron
®
(ECON2)
Size of lter or element
NF: 160, 240, 280, 330, 500, 750, 950, 1310, 1340, 1350, 2610, 2640, 2650, 5240, 7840, 10440
Operating pressure
D = 25 bar
Type and size of connection
Type Port Filter size
160 240 280 330 500 750 950 1310 1340 1350 2610 2640 2650 5240 7840 10440
E G 1 1/4
F G 1 1/2
K SAE DN 40 (1½")
L SAE DN 50 (2")
M SAE DN 65 (2½")
N SAE DN 80 (3")
P SAE DN 100 (4")
¡ ¡ ¡ = Discontinued model
Filtration rating in µm
ON: 1, 3, 5, 10, 15, 20 ECO/N, V: 3, 5, 10, 20 P/HC: 10, 20 AM: 40
ON/PP*: 5 W/HC: 25, 50, 100, 200 BN/AM: 3, 10
Type of clogging indicator
A with steel blanking plug in indicator port
BM visual
C electrical
D visual and electrical
Type code (TKZ)
2
Modication number
X the latest version is always supplied
Supplementary details
B. special cracking pressure of bypass (e. g. B6 = 6 bar); no details = standard 3 bar
EM manual vent with shut-off valve
EP permanent vent via Minimess hose
FF mounting ange for NF 1340/2640
KB without bypass valve
L... light with appropriate voltage (24, 48, 110, 220 Volt)
LED 2 light emitting diodes up to 24 Volt
SB4 lling line with Ø 4 mm
V FPM seals
NF ON 2640 D P 10 D 2 . X /-L24
for other clogging indicators
see brochure no. 7.050../..
only for clogging indicators
type "D"
2.2 REPLACEMENT ELEMENT 2600 R 010 ON /-V
Size
0160, 0240, 0280, 0330, 0500, 0750, 0950, 1300, 2600
Type
R
Filtration rating in µm
ON: 001, 003, 005, 010, 015, 020 ECON2, V: 003, 005, 010, 020 P/HC: 010, 020 AM: 040
ON/PP*: 005 W/HC: 025, 050, 100, 200 BN4AM: 003, 010
Filter material
ON, ON/PP*, ECON2, V, W/HC, P/HC, BN4AM, AM
Supplementary details
V (for descriptions, see point 2.1)
2.3 REPLACEMENT CLOGGING INDICATOR VM 5 D . X /-L24
(IMPORTANT: the clogging indicator must not be screwed into the cover plate)
Type
VM Differential pressure indicator
Pressure setting
2 2 bar (5 = 5 bar), others on request
Type of clogging indicator (see point 2.1)
Modication number
X the latest version is always supplied
Supplementary details
L..., LED, V (for descriptions, see point 2.1)
* for BG 1340 lters and above
3
E 7.112.7/11.16
TECHNICAL DESCRIPTION
The NF n+1 lter series has been developed in line with the classic NF lters. It
features a ball change-over valve from HYDAC Filtertechnik GmbH and offers
a cost-efcient and space saving alternative to the classic, fully duplex version
of the NF series. In comparison to the previous buttery change-over valve with
16 bar operating pressure, the new HYDAC ball change-over valve is rated to
the higher operating pressure of 25 bar. Since each lter tower can be shut off
individually using the ball change-over valve, the lters can be changed while the
system is running, guaranteeing 24 hour operation.
Flow rate: 500–4000 l/min
Nom. pressure: up to 25 bar
Size: 5240, 7840, 10440 (others on request)
2.4 INLINE FILTER – INDIVIDUAL SHUT-OFF CAPABILITY
MODEL CODE NF ON 5240 D P 10 D 4 . X /-L24
Filter type
NF
Filter material (see point 2.1)
Size of lter or element
NF: 5240, 7840, 10440
Operating pressure
D = 25 bar
Type and size of connection
Type Port Filter size
5240 7840 10440
P SAE DN 100 (4")
Filtration rating in µm (see point 2.1)
Type of clogging indicator (see point 2.1)
Type code
4 individual shut-off capability
Modication number
X the latest version is always supplied
Supplementary detail (see point 2.1)
DIMENSIONS
drain on
contaminated
side
G 3/4"
port for
diff. pressure
indicator
G 1/2"
vent
E 7.112.7/11.16
4
3. FILTER CALCULATION /
SIZING
The total pressure drop of a lter at a
certain ow rate Q is the sum of the
housing ∆p and the element ∆p and is
calculated as follows:
∆p
total
= ∆p
housing
+ ∆p
element
∆p
housing
= (see Point 3.1)
∆p
element
= Q •
SK*
•
viscosity
1000 30
(*see point 3.2)
For ease of calculation, our Filter
Sizing Program is available on request
free of charge.
NEW: Sizing online at www.hydac.com
3.1 ∆p-Q HOUSING CURVES BASED
ON ISO 3968
The housing curves apply to mineral oil
with a density of 0.86 kg/dm³ and
a kinematic viscosity of 30 mm²/s.
In this case, the differential pressure
changes proportionally to the density.
NF 160, 240, 280
Q [l/min]
∆p [bar]
NF 330, 500, 750
Q [l/min]
∆p [bar]
NF 5240
Q [l/min]
∆p [bar]
NF 7840
Q [l/min]
∆p [bar]
NF 10440
Q [l/min]
∆p [bar]
NF 1310, 2610
NF 1340, 2640
NF 950, 1350, 2650
Q [l/min]
∆p [bar]
5
E 7.112.7/11.16
3.2 GRADIENT COEFFICIENTS (SK) FOR FILTER ELEMENTS
The gradient coefcients in mbar/(l/min) apply to mineral oils with a kinematic
viscosity of 30 mm²/s. The pressure drop changes proportionally to the change in
viscosity.
NF V W/HC ECON2
3 µm 5 µm 10 µm 20 µm – 3 µm 5 µm 10 µm 20 µm
160 4.9 3.5 2.4 1.5 0.193 9.5 5.9 3.8 2.9
240 3.2 2.6 1.7 1.2 0.123 6.2 3.8 2.6 1.8
280 1.4 1.1 0.7 0.5 0.017 3.1 2.2 1.6 1.0
330 2.1 1.7 1.1 0.8 0.195 4.2 2.7 1.7 1.2
500 1.5 1.2 0.8 0.5 0.128 3.0 1.9 1.3 0.8
750 0.6 0.5 0.3 0.2 0.049 1.3 0.9 0.6 0.4
950 0.7 0.6 0.4 0.2 0.048 1.2 0.8 0.5 0.4
1300 0.5 0.4 0.3 0.2 0.034 0.8 0.6 0.4 0.3
2600 0.3 0.2 0.1 0.1 0.017 0.4 0.3 0.2 0.1
NF ON ON/PP
1 µm 3 µm 5 µm 10 µm 15 µm 20 µm 5 µm
160 16.0 8.00 5.68 3.22 2.69 2.32 –
240 10.4 5.18 3.66 2.27 1.84 1.41 –
280 5.10 2.57 2.08 1.43 1.06 0.80 –
330 8.09 3.72 2.73 1.48 1.28 1.02 –
500 5.27 2.60 1.90 1.09 0.84 0.69 –
750 2.11 1.12 0.92 0.53 0.34 0.32 –
950 2.39 1.03 0.79 0.48 0.38 0.31 –
1300 1.72 0.72 0.59 0.35 0.32 0.22 1.00
2600 0.84 0.36 0.29 0.18 0.16 0.11 0.45
E 7.112.7/11.16
6
4. DIMENSIONS
vent
SW6 (G 1/4)
NF 160-280
NF No. of Weight incl. Vol. of pressure
elements element [kg] chamber [l]
330 1x0330 R... 7.8 2.05
500 1x0500 R... 9.0 2.80
750 1x0750 R... 14.1 6.08
NF No. of Weight incl. Vol. of pressure
elements element [kg] chamber [l]
160 1x0160 R... 4.5 0.8
240 1x0240 R... 5.6 1.1
280 1x0280 R... 9.1 2.1
NF 330-750
port for
clogging indicator
View B
outlet
G1 1/4
oil drain
SW6 (G 1/4)
lling
connection
G 3/4"
View A
NF 280: 400
NF 240: 220
NF 160: 160
NF 280: 485
NF 240: 304
NF 160: 245
inlet
G1 1/4
NF 330: 170
NF 500: 250
NF 750: 600
NF 330: 321.50
NF 500: 402.50
NF 750: 752.50
outlet *
1 1/2" SAE
3000 PSI
inlet *
1 1/2" SAE
3000 PSI
vent
SW6 (G1/4)
oil drain
SW6 (G 1/4)
clogging indicator for differential pressure
M12x20/25 deep
* Alternatively:
threaded connection G 1 1/2
7
E 7.112.7/11.16
NF 950, 1350, 2650
NF No. of Weight incl. Vol. of pressure
elements element [kg] chamber [l]
950 1x0950 R... 16 10
1350 1x1300 R... 18 13
2650 1x2600 R... 25 25
Port A B ØC M
SAE DN 50 (2") 77.8 42.9 50 M12x15
SAE DN 65 (2½") 88.9 50.8 65 M12x15
SAE DN 80 (3") 106.4 62.9 75 M16x24
SAE DN 100 (4") 130.2 77.8 100 M16
inlet
outlet
port for
diff. pressure
indicator
G 1/2"
port for
diff. pressure
indicator
G 1/2"
drain on
contaminated
side G 3/4"
drain on
contaminated side
G 3/4"
Size
Size
Size
vent
G 1/2"
NF 1310/2610 ... 2.X (on request)
drain on
contaminated side
G 1/2"
port for
diff. pressure
indicator
G 1/2"
Size
Size
vent
G 1/2"
inlet
outlet
lling
connection
G 3/4"
NF No. of Weight incl. Vol. of pressure
elements element [kg] chamber [l]
1310...2.X 1x1300 R... 17 14
NF No. of Weight incl. Vol. of pressure
elements element [kg] chamber [l]
2610...2.X 1x2600 R... 23 25
E 7.112.7/11.16
8
NF No. of Weight incl. Vol. of pressure
elements element [kg] chamber [l]
2640...2.X 1x2600 R... 23 25
NF No. of Weight incl. Vol. of pressure
elements element [kg] chamber [l]
1340...2.X 1x1300 R... 17 14
NF 1340/2640 ... 2.X
lling
connection
G 3/4"
vent
G1/2
outlet
outlet
inlet
inlet
NF 1340/2640 ... 2.X/-FF
drain on
contaminated
side G 1/2"
mounting ange
Size 2640: 1031
±3
vent
G 1/2"
port for
diff. pressure indicator
G 1/2"
port for
diff. pressure
indicator
G 1/2"
Size 1340: 592
±3
NF 5240 ... 2.X
drain on
contaminated
side G 1/2"
NF No. of Weight incl. Vol. of pressure
elements element [kg] chamber [l]
5240...2.X 2x2600 R... 90 60
9
E 7.112.7/11.16
NF 7840 2.x
NF No. of Weight incl. Vol. of pressure
elements element [kg] chamber [l]
7840 3x2600 R... 125 88
NF No. of Weight incl. Vol. of pressure
elements element [kg] chamber [l]
10440 4x2600 R... 180 120
vent
drain on
contaminated side
G 1/2"
inlet
outlet
port for
diff. pressure indicator
G 1/2"
NF 10440 2.x
inlet
outlet
port for
diff. pressure indicator
G 1/2"
drain on
contaminated side
G 1/2"
vent
E 7.112.7/11.16
10
NOTE
The information in this brochure relates to the operating conditions and applications
described.
For applications or operating conditions not described, please contact the relevant
technical department.
Subject to technical modications.
HYDAC Filtertechnik GmbH
Industriegebiet
D-66280 Sulzbach/Saar
Tel.: 0 68 97 / 509-01
Fax: 0 68 97 / 509-300
Internet: www.hydac.com
NOTES